Shetland Pony Classifieds

A Safe, Comfortable Riding Setup for Shetland Ponies

Choosing riding tack for a Shetland pony requires more care than simply buying the smallest saddle or bridle available. Shetlands have short backs, broad barrels, compact necks and often a low, rounded wither. Their size can vary considerably between miniature, midi and standard types, so equipment that suits one pony may pinch, slip or restrict another.

For Australian owners, fitting also needs to account for hot weather, dusty yards, flies and long distances between specialist saddlers. Whether you are preparing a pony for a child in Melbourne, a riding program near Brisbane or weekend activities outside Adelaide, comfort and balance should guide every purchase. A useful place to compare ponies, backgrounds and seller information is Shetland pony classifieds, especially when matching a pony’s build and training history to its intended work.

Start with the pony, not the saddle

Measure the pony while it is standing square on level ground. Record the back length from behind the shoulder blade to the last rib, the approximate barrel circumference and the width across the withers. These measurements provide a starting point, but they cannot replace a physical fit check. Two ponies of the same height may have very different backs, shoulders and girths.

The rider’s size matters just as much. A child should be balanced, secure and light enough for the pony’s conformation and fitness. A standard Shetland may carry a small child for carefully managed sessions, while a miniature or narrow-backed pony may be better suited to leading, driving or groundwork. Ask an experienced instructor or equine professional to assess the combination before regular riding begins.

Watch the pony move freely before fitting equipment. A short, choppy stride, reluctance to go forward, tail swishing or repeated ear-pinning can indicate discomfort, although these signs may have other causes. Tack must be checked alongside dental care, hoof balance, muscle condition and training.

Check saddle shape and clearance

A suitable saddle should sit level, remain stable without excessive tightening and leave the shoulder free. The front edge must not press on the shoulder blade as the pony walks. There should be clearance through the gullet, with even contact along the panels rather than pressure concentrated at the front or rear.

Shetlands often need a broad, short-backed saddle with a tree and panels designed for their round shape. A narrow saddle can bridge across the back or dig into the withers, while an overly wide model may rock from side to side. Pony saddles, lightweight synthetic saddles and properly fitted treeless designs can all work, but the label alone does not prove suitability.

Place the saddle behind the shoulder, not directly on top of it, and use a thin, well-fitting numnah rather than layers of thick pads to disguise a poor fit. Check the saddle without a girth, then with the rider mounted. After a short walk and trot, inspect the pony’s back for dry patches, swelling, heat or rubbed hair.

Tack feature What to check Common warning sign
Saddle length It finishes well before the last rib The rear extends over the lumbar area
Gullet width The spine remains clear from front to back Pressure or rubbing along the backbone
Panel contact Weight is spread evenly Gaps, bridging or one-sided pressure
Girth position The girth lies in a natural groove Saddle slides forward or sideways
Stirrup balance The rider’s leg hangs naturally Rider tips forward or pulls on the reins
Numnah or pad It is clean, breathable and correctly shaped Creases, bunching or trapped sweat

Match the bridle and other equipment

A bridle should be proportionate to the pony’s head, with cheek pieces adjusted so the bit rests comfortably without pulling at the lips. The browband should not press behind the ears, and the throatlash should allow adequate room for swallowing. Small pony bridles vary widely, so measure the head rather than relying only on terms such as mini, pony or cob.

The bit should suit the pony’s mouth, education and the rider’s hands. A mild, correctly fitted snaffle is often a sensible starting point, but some Shetlands have limited room between the tongue and palate. A qualified bit fitter can check mouth shape, teeth and rein alignment. The bit should not be used to compensate for an unstable seat or unsuitable training.

A cavesson noseband should be loose enough for comfortable breathing and chewing. Flash, drop and figure-eight nosebands are unnecessary unless there is a clear, professionally assessed reason. Martingales, breastplates and cruppers also need careful consideration: a breastplate may help a saddle stay back on a broad pony, while a crupper can prevent movement on a very short back, but neither should mask incorrect saddle placement.

Adapt tack to Australian conditions

Heat and humidity can make synthetic materials attractive in coastal Queensland and New South Wales because they are generally easy to wash and dry. Leather remains durable when cleaned and conditioned, but sweaty tack should be wiped after every ride and stored where mould cannot develop. In Darwin, Cairns and other humid areas, allow bridles and girths to dry fully before putting them away.

Dusty arenas around Perth and inland South Australia can irritate skin beneath a saddle or girth. Brush loose dirt from the pony before tacking up, use clean cloths and inspect the girth area after work. During summer in Victoria or Canberra, schedule rides during cooler parts of the day and watch for heat stress rather than adding thick padding.

Fly veils, breastplates and protective boots must never interfere with movement or create pressure points. Boots that collect sand can cause rubs, while poorly secured rugs and straps may catch during turnout. Australian owners travelling to shows or pony club events should also clean shared equipment and follow venue biosecurity requirements, particularly when moving between properties.

Local saddlery shops may stock common pony sizes, but specialist fitting services are more available near larger centres such as Sydney, Melbourne, Brisbane and Perth. In regional areas, take accurate measurements and photographs before ordering online, and check the seller’s returns policy. Used tack can be excellent value, provided the tree is sound, stitching is secure and the equipment has no hidden cracks or stretched holes.

Build a practical fitting routine

Make tack inspection part of every ride rather than an occasional task. Run your fingers beneath the saddle panels and girth, check that buckles lie flat and look for hair loss or tenderness. After riding, loosen the girth gradually, remove sweat and examine the pony’s back before turning it out.

Keep a record of saddle checks as the pony changes with age, exercise, weight or seasonal coat. A growing child may alter the balance of the saddle even when the pony’s body remains the same. Reassess after a spell, illness, pregnancy, a major change in workload or a move between cooler Tasmania and hotter mainland conditions.

Useful checks before regular riding include:

A well-fitted setup should allow the pony to lengthen its neck, lift its back and move evenly. Rechecking that fit as conditions change protects soundness and makes riding more comfortable for both pony and rider.